Last updated: 2026-11-19. Regulatory and Amazon requirements change, so check the sources linked below.
If you sell your own supplement brand on Amazon and a contract manufacturer makes every batch, you still need a quality program of your own. It is not a copy of the factory's program, and it is usually much smaller. But it has to exist, it has to be written down, and someone at your company has to own it.
I'm Jared Clark, and this is the question I hear most from brand owners who are new to good manufacturing practice (GMP). In plain terms, GMP is a set of rules for making, testing, packaging, labeling, and storing a product so that what is in the bottle matches what is on the label, every time. Below I walk through what the rule says, what stays with you when a factory does the making, what Amazon adds on top, and who can help you set it up.
Do I need my own GMP program if a contract manufacturer makes my supplement?
Yes, in most cases you need a quality program of your own, scaled to what your company actually does.
The rule is 21 CFR Part 111, which is the FDA's current good manufacturing practice regulation for dietary supplements. A dietary supplement here means a product you take by mouth that contains a dietary ingredient such as a vitamin, mineral, herb, or amino acid, and that is labeled as a supplement. A contract manufacturer (sometimes called a co-packer or CMO) is a factory that makes your product to your formula and then ships it to you or to your warehouse.
The part that surprises people is where responsibility lands. When your company's name is on the label, FDA holds you responsible for that product, no matter whose building it was made in. In the preamble to the 2007 final rule that created Part 111 (72 FR 34752), FDA said that a firm that contracts out manufacturing remains responsible for ensuring the product is made in compliance with Part 111 and meets its specifications. The specification and quality control provisions, 21 CFR 111.70, 111.75, and 111.127, are where that responsibility shows up in the text. My reading is that a brand has to know enough about how the product is made to decide whether it meets your specifications, and then decide whether to release it. You can hand off the making. In my view you cannot hand off the deciding.
You can find FDA's current dietary supplement guidance documents on the FDA dietary supplements page.
Doesn't the factory's GMP certificate cover me?
In my experience, this is the most common assumption brands make, and it is the one that causes the most trouble. Owners reason that the factory is certified, so the product is covered.
A factory certificate speaks to the factory. It tells you something about how that site runs its operations on the day it was audited. It says nothing about whether the batch sitting in your hands meets your specifications, and it says nothing about whether your company approved it for sale. That decision is yours.
A certificate is still useful. It is good evidence when you qualify a manufacturer, and Amazon may look at it. But it is one input to your program, not a replacement for it.
What does a small brand's quality program actually contain?
What is required and what is sensible. Part 111 applies directly to firms that manufacture, package, label, or hold dietary supplements (21 CFR 111.1). The 2007 preamble treats a firm that contracts out those operations as responsible for the result. So the legally grounded duties for a label-only brand are having specifications (111.70), making sure they are met (111.75), and making the release decision (the quality control responsibilities in 111.127), plus complaint handling (Subpart O) and serious adverse event reporting under section 761 of the FD&C Act. The quality agreement, the written form of the audit program, and the exact structure below are my recommended way to meet those duties, not text of the rule.
For a brand that only owns the label and never touches the product, the program is usually five things: specifications, a quality agreement, manufacturer oversight, a lot release step, and a handful of procedures. It is not a binder of factory standard operating procedures (SOPs, which are the written step-by-step instructions a factory follows).
| Element | What it is | What the document looks like |
|---|---|---|
| Finished product specifications | The identity, purity, strength, and composition limits every batch must meet | A one- or two-page table per product listing each test, its method, and its acceptable range |
| Quality agreement | A signed contract section that divides quality duties between you and the manufacturer | A short document naming who approves formula changes, who keeps batch records, and who investigates a failed test |
| Manufacturer qualification | Proof the manufacturer follows Part 111 | Your audit report, or a recent third-party audit report, kept on file and repeated on a schedule |
| Lot release | Your review and sign-off before a batch ships | A one-page release form signed by a named person, with the certificate of analysis attached |
| Complaint, recall, and adverse event procedures | What you do when something goes wrong | Short written procedures plus a log that records each event and what you did |
Let me take each in turn.
Step 1: Write specifications for your finished product
A specification is a written limit that a batch must meet before it can be sold. Under 21 CFR 111.70 (in Subpart E, the production and process control system), specifications must be established for identity, purity, strength, and composition of the finished batch, and 111.75 requires you to verify they are met. Brands often miss that 111.75(a)(1) requires at least one appropriate test to verify the identity of each component that is a dietary ingredient, rather than relying on a supplier's paperwork alone. For a brand, the practical version is a document for each product that answers four questions:
- Identity: Is the main ingredient what we say it is? For example, is the botanical the right species?
- Purity: Are contaminants such as heavy metals, microbes, and pesticide residues under the limits we set?
- Strength: Does the amount of each active ingredient match the label claim, within a stated range?
- Composition: Do the other ingredients, and the finished form (capsule weight, tablet hardness, and so on), match the approved formula?
Here is a simple illustration. A turmeric capsule specification might list curcuminoid content as the strength test, with a low and high limit, plus limits for lead, arsenic, cadmium, and mercury, plus a total plate count for microbes. As an illustrative row only: "Total curcuminoids, HPLC, 95.0% to 105.0% of label claim" or "Lead, ICP-MS, not more than 1.0 ppm". The numbers belong to you and your product, so I won't pretend there is one right set. What matters is that they are written down before the first order, not after the first problem.
Step 2: Get a signed quality agreement with the manufacturer
FDA's guidance doesn't use the words "quality agreement." But it is a common and sensible way to show who does what, and an inspector reading your file will want to see that someone decided these things on paper.
A workable quality agreement answers at least these questions:
- Who approves a change to the formula, the ingredient supplier, or the process?
- Who keeps the batch records, and for how long, and how fast can you get a copy?
- If a batch fails a test, who investigates, and how quickly do they tell you?
- Who handles a customer complaint that points at manufacturing?
- Will the manufacturer let you, or an auditor you hire, visit the site?
Most contract manufacturers already have a template, and many are built to favor the factory. Read it with your specifications next to it. If the agreement lets the manufacturer swap an ingredient supplier without telling you, your specification may no longer mean what you think it means.
Step 3: Check the manufacturer's Part 111 compliance before you order
Before you place an order, confirm the manufacturer really follows Part 111. You have two ways to do that:
- Your own audit. You, or someone you hire, visits the site and checks it against Part 111.
- A recent third-party audit report. An independent auditor has already done the visit, and you review the full report, not only the certificate page.
Either way, keep the result on file, and repeat the check on a schedule. Every year or two is a common rhythm. If the manufacturer has had a change in ownership, a new facility, or a quality problem, I'd repeat it sooner.
When you read an audit report, look past the pass or fail. Read the findings the factory had to correct and see whether any touch the things you care about, such as ingredient identity testing or how the lab confirms strength.
Step 4: Set up lot release
A lot (or batch) is a defined quantity of product made in one run. Lot release is the moment someone decides that this lot can be sold. For a brand, here is what that looks like in practice:
- The manufacturer sends a certificate of analysis (COA), which is the lab report for that batch, along with the batch record, which is the written history of how it was made.
- A named person at your company compares each result to your specification.
- That person signs and dates a release decision: release, hold, or reject.
- The signed form and the documents behind it go in your files.
A simple release form lists the product and lot number, each specification line with the result and pass or fail, confirmation that identity was tested, any deviations or manufacturer investigations, the decision, and the signer's name and date.
If nobody at your company does this, you haven't made the decision FDA expects the brand to make. And if the only signature on the release is the manufacturer's, the same is true. I would start here, because this is the gap I find most often.
One small point that saves a lot of pain: the person releasing should be able to say no. If the release signer can be overruled every time a shipment is late, the step exists on paper only.
Step 5: Write procedures for complaints, recalls, and adverse events
Three short procedures cover most of what a label-owner needs.
Complaints. Subpart O of Part 111 covers product complaints: 21 CFR 111.553 requires a qualified person to review each complaint, and 111.560 requires that complaints related to Part 111 be investigated and that records of the review and investigation be kept. Keep a log, review each complaint, and investigate the ones that could relate to quality, such as a wrong count, a strange smell, or a broken seal. Send the ones that point to manufacturing to your manufacturer under the quality agreement.
Recalls. Write down who decides to pull a product, how you find every lot and customer, and how you notify Amazon and FDA. Amazon sellers often have an advantage here because order records are detailed, but only if you can connect a lot number to the orders that received it.
Adverse events. An adverse event is a health problem a customer reports after using your product. A serious adverse event is one that involves, for example, death, a life-threatening illness, hospitalization, a disabling injury, a birth defect, or medical care needed to prevent one of those outcomes. Under section 761 of the Federal Food, Drug, and Cosmetic Act, the company named on the label has to report a serious adverse event to FDA within 15 business days. If your label says "Distributed by" your company, that is you, not the factory.
Make sure a customer can reach you in the first place. The same section requires a domestic address or phone number on the label for adverse event reports, and your procedure should say who answers that number and who files the report. The report goes to FDA on MedWatch Form 3500A with a copy of the label, and section 761 requires you to keep adverse event records for six years.
When do I need more than this?
More applies if you do anything with the product other than own the label. Part 111 covers manufacturing, packaging, labeling, and holding operations directly, so the extra duties come with the activity. The subpart references are a guide to where to start reading:
| If you... | Then you probably also need... |
|---|---|
| Store finished product in your own space | Holding and distributing controls (Subpart M), such as storage conditions and records |
| Relabel product | Packaging and labeling controls (Subpart K), since relabeling is a labeling operation under the rule |
| Repack into new containers | Packaging and labeling controls (Subpart K) and, usually, more testing and records (Subparts E, F, and P) |
| Ship from your own warehouse | Distribution controls (Subpart M), returned product procedures (Subpart N), and recall-readiness procedures |
| Receive bulk product and finish it | Much of what a manufacturer does across Part 111, which is a different and larger program |
A prep-and-ship warehouse that stores your stock raises the same holding questions (Subpart M). Put in the agreement who is responsible for storage conditions and how you would be told if something went wrong.
What does Amazon require on top of FDA?
Amazon adds its own layer. This section is not authoritative. Amazon has a dietary supplement policy in Seller Central that sets documentation requirements, which have included evidence of good manufacturing practice, often through a third-party certification body. I have not listed specific accepted standards here because Amazon's list changes and differs by category and marketplace. A factory certificate may help, but it does not cover your duties as the brand.
Search for the dietary supplements policy in Seller Central and use the current list for your category. The date at the top tells you when I last reviewed this article, and Amazon's own pages are the source that counts.
One practical habit: when you build your specification and release records, put them where you can hand them over in a day. If Amazon asks for documentation or an account gets flagged, a tidy file is the difference between a quick answer and a suspended listing.
Who can set up a GMP program for a supplement brand?
This is the second half of the question, and the answer depends on what you need.
You have three realistic options:
- Do it yourself with the rule in hand. It's possible for a simple one-product brand. The risk is that you write documents that look right but miss what an inspector or an auditor expects.
- Ask your manufacturer to write it. Convenient, but they would be writing the procedures for the company that is supposed to be overseeing them.
- Hire a consultant who has done this for brands. We sell this service, so weigh this accordingly. DIY can be enough for a simple one-product brand with a careful owner, and a consultant earns the cost mainly when you have several products, a thin team, or an upcoming audit or inspection. Either way, there is one condition.
The condition is hands-on Part 111 experience with brands, not only factories. Factory consultants know how to write a production SOP. A brand needs someone who knows how to write a specification from a customer's side, how to negotiate a quality agreement, and how to set up a release step that a small team can actually run.
Questions worth asking any consultant:
- Have you written quality agreements and lot release procedures for label-owners?
- Will you do a gap analysis against Part 111 so I can see what is missing before anything is written?
- Can you help me prepare for an FDA inspection, including a mock inspection?
- Who owns the documents when you finish, and can my team run them without you?
At Certify Consulting, our dietary supplement work includes a gap analysis against Part 111, written specifications and procedures, and a mock FDA inspection. If you want to see how a broader program fits together, our GMP certification overview explains the options in more detail.
What would I do first, today?
If I were in your seat this afternoon, I would do three things in this order.
- Pull your manufacturer contract and check whether there is a signed quality agreement. If there is only a supply agreement with a price list, you don't have one.
- Find out when the manufacturer was last audited, and whether that report is in your files, not only in the manufacturer's.
- Find out who signs the release decision before a lot ships.
If the answer to the third question is nobody, or the manufacturer, begin there. A signed release decision on every lot is the piece that stays with the brand as the firm responsible for the finished product, and it is also the piece that is easy to put in place within a week.
Most of what I see in new brands is not bad intent. It is a quiet assumption that the factory has it covered.
Frequently asked questions
Do I need my own GMP program if my contract manufacturer is GMP certified? Yes, you need a quality program scaled to your role. The factory's certificate speaks to the factory, not to your release decision. See the sections above for the rule citations.
What is the minimum a label-only supplement brand should have? Usually written finished-product specifications, a signed quality agreement with the manufacturer, a Part 111 compliance check of the manufacturer on file, a signed lot release for every batch, and procedures for complaints, recalls, and serious adverse events.
Who has to report a serious adverse event, the brand or the factory? Under section 761 of the Federal Food, Drug, and Cosmetic Act, the company named on the label must report a serious adverse event to FDA within 15 business days. That is typically the brand.
Does Amazon require a GMP certificate for supplements? Amazon's dietary supplement policy has asked for evidence of good manufacturing practice, but requirements change and I have not verified the current list. Confirm it for your category in Seller Central.
Can my manufacturer write my quality program for me? They can supply a template, but the program exists so that your company oversees the manufacturer. It works better when someone independent of the factory, with brand-side Part 111 experience, sets it up, and your own team can run it.
Last updated: 2026-11-19
Jared Clark
Principal Consultant, Certify Consulting
Jared Clark is the founder of Certify Consulting, helping organizations achieve and maintain compliance with international standards and regulatory requirements.