If FDA has told you they're coming, bring in a consultant who knows 21 CFR Part 111, and start checking your own records today. FDA inspection preparation is largely a records exercise, and supplement GMP records are something you can start fixing now. Below: who can help, the five records to check first, what each should look like, and what to do when you find a gap.
Who can help you get ready for an FDA inspection?
The help you want is a consultant who knows 21 CFR Part 111. Part 111 is FDA's set of current good manufacturing practice (GMP) rules for dietary supplements. GMP simply means the written, repeatable controls a company uses so that every batch is made the same way and meets its stated requirements. You can read the whole rule on the eCFR page for 21 CFR Part 111.
Ideally the person has prepared supplement plants for inspections before. A former FDA investigator often fits well, because an FDA investigator is the FDA employee who actually walks your facility, asks for records, and writes up what they find. Someone who has sat in that chair knows which questions come first and which gaps get written down.
Certify Consulting offers a gap review of the five record types below and a mock inspection, and you can book a free 30-minute call through our contact page. Before you hire anyone, though, I'd start looking at your own files. Hiring takes a few days, and every one of those days is a day you could be checking records. If you want a sense of what a supplement-focused consulting engagement looks like, our dietary supplement consulting page lays it out.
Does Part 111 even apply to us?
Part 111 applies to anyone who manufactures, packages, labels, or holds a dietary supplement. That scope is stated in 21 CFR 111.1. The word "holds" matters, because a company that only warehouses finished product, or one that outsources manufacturing to a contract manufacturer, still has Part 111 duties for the steps it performs. If you are a brand owner using a contract manufacturer, expect the investigator to ask what you did to confirm the product was made to your specifications.
Which records does an FDA investigator ask for first?
In my experience, and I'm giving you my view here and not a rule, an investigator usually starts with the records that show whether your system controls what goes into a product and what comes out. At a supplement maker those are usually five:
- Specifications
- Master manufacturing records
- Batch production records
- Complaint files
- Supplier qualification
Here is how they compare at a glance, and where Part 111 addresses each one.
| Record | What it is in plain words | Main Part 111 reference | Quick check you can do today |
|---|---|---|---|
| Specification | The written list of what an ingredient or finished product must meet | 21 CFR 111.70 | Pull specs for your top products; confirm each exists, is approved, and test results match |
| Master manufacturing record (MMR) | The written recipe for a product, for each batch size | 21 CFR 111.205 and 111.210 | Confirm it is dated, approved by quality control, and matches what your floor does |
| Batch production record (BPR) | What happened in one actual lot | 21 CFR 111.255 and 111.260 | Lay three recent BPRs next to their MMRs |
| Complaint file | The written procedure and a file for each product complaint | 21 CFR 111.553, 111.560, 111.570 | Check email and customer service complaints made it into the file |
| Supplier qualification | Proof you can trust an ingredient supplier's certificate of analysis | 21 CFR 111.75 | Confirm every key ingredient supplier has a qualification file |
I'll take them one at a time.
Specifications: what must each ingredient and product meet?
A specification is the written list of what an ingredient or finished product must meet. Under 21 CFR 111.70, that includes things like identity, purity, strength, composition, and limits on contaminants. Think of it as the answer key. If you don't have one, there is nothing to grade a test result against.
What to do today: pull the specifications for your top few products. For each one, check three things. Does it exist? Is it approved by someone with the authority to approve it? And do your actual test results match what the specification says you must meet?
The most common trap here is identity testing. Under 21 CFR 111.75(a)(1), you must conduct at least one appropriate test or examination to verify the identity of any component that is a dietary ingredient. Because this requirement is explicit, identity testing on incoming dietary ingredients is a place to look hard. Section 111.70 also sets specifications for components and in-process controls, so check those files too.
A simple, healthy specification record might look like this for an ingredient:
- Ingredient name and the supplier's name
- Identity requirement and the test method you use to confirm it
- Strength or potency range, if it applies
- Contaminant limits you've set (for example, heavy metals or microbial limits)
- Approval signature and date from quality control
Master manufacturing record: is the recipe approved and real?
The master manufacturing record, usually shortened to MMR, is the written recipe for a product. 21 CFR 111.205 requires one for each unique formulation of a dietary supplement you manufacture and for each batch size. Section 111.210 lists what it must contain, including the ingredients, amounts, and the steps.
Under 21 CFR 111.123, your quality control personnel must review and approve the MMR and any change to it. Quality control personnel are the person or team you designate to approve records and decide whether a lot can ship. In a small company that might be one person. The rule doesn't require a department.
What to do today: open the MMR for a product you make often. Check that it is dated, that quality control approved it, and that it matches what your floor actually does, with the same ingredients, the same amounts, and the same steps. It is easy for the recipe on paper to fall a version or two behind the recipe in practice, because someone on the line improved a step and nobody updated the document. An investigator comparing the floor to the paper will find that quickly.
Batch production record: does it prove what happened in one lot?
The batch production record, or BPR, shows what happened in one actual lot. It's the evidence that the recipe was followed. 21 CFR 111.255 requires you to establish a batch production record, and 111.260 lists what it must include. Under 21 CFR 111.123, quality control personnel must review the batch record and approve or reject it, which is how a lot gets released.
What to do today: take three recent lots and set each batch record next to its master record. Then look for:
- Blank fields
- Missing initials
- Weights that don't reconcile (what you started with, what you used, and what's left should add up)
- Any sign that quality control reviewed the record before the lot shipped
Corrections deserve a word, because this is where good plants and struggling plants look different on paper. A correction should be one line through the entry, with initials and the date, so the original number is still readable. Scribbling it out, whiting it out, or overwriting it makes the investigator wonder what was hidden. Single-line corrections with initials and a date are widely used good documentation practice, and I'd train everyone on them this week.
Complaint files: are customer problems being captured and reviewed?
Part 111 expects a written procedure for product complaints (21 CFR 111.553) and a file for every product complaint (21 CFR 111.570). Under 21 CFR 111.560, a qualified person reviews each complaint. Section 111.3 defines a qualified person as someone with the education, training, or experience, or a combination, needed to perform the assigned function. In a small company, that can be an employee or the owner, as long as they have the training or experience for the job.
What to do today: check that complaints that came in by email, social media, or through customer service made it into the file. In many companies the complaint lives in an inbox and never reaches the quality file. Then check that someone wrote down whether each complaint needed an investigation, and why. "No investigation needed because the customer described a taste preference, not a safety or quality problem" is a perfectly good entry. A blank is not.
Supplier qualification: can you rely on a certificate of analysis?
A certificate of analysis (COA) is a document from the supplier that reports the test results for a lot of ingredient. Under 21 CFR 111.75(a)(2), a COA can stand in for your own testing of some specifications, but only if you've qualified the supplier and you periodically confirm its results. Qualifying a supplier means you've done something to establish that its COAs are reliable, and you've written down what you did.
What to do today: check that every key ingredient supplier has a qualification file. It should show how you decided to trust that supplier and the dates when you confirmed its results against your own testing.
Here is the part that trips people up. The identity test on a dietary ingredient is the one a COA can't replace, so you test it yourself. A supplier's paper can cover other specifications once you've qualified the supplier, but not identity of the dietary ingredient.
What if you find gaps in your records?
You probably will find some, and that's normal. What you do next matters more than the gap itself.
Fix the process going forward, and write a dated explanation of what you found. For example: "On [date], during an internal review, we found that three batch records from [month] were missing the quality control review signature. We reviewed those records on [date], found no impact on release decisions, and updated our release checklist." That memo is honest, dated, and shows a working system.
Don't backdate a record, and don't recreate one so it looks like it was made at the time. Backdating can be exposed by comparing records against each other, and it turns a paperwork gap into a question about whether they can trust anything else you hand them. This is among the most damaging mistakes a company can make in the weeks before an inspection, because the original gap was usually fixable and the backdating is not.
What should you expect when the FDA investigator arrives?
Expect the FDA investigator to ask to see your facility and your records. At the end, if the investigator observes conditions that may violate the law, they may issue a Form FDA 483, which lists their observations. FDA explains what the form is, and what your options are, in its Form 483 frequently asked questions. A 483 is not a final finding of violation, but how you respond to it matters, so read that page before the investigator arrives. FDA asks that you respond to a 483 in writing within 15 business days, so plan to have your corrective actions ready to document.
A few practical habits help on the day itself. Designate one person to host the investigator and one to retrieve records. Keep a log of what was requested and handed over. If you can't find a record, say so plainly and don't guess. "We'll find it and bring it to you" is a far better answer than improvisation.
How do you choose the right consultant?
When you call consultants, ask these questions:
- Have you prepared plants that do what we do? Manufacturing, packaging, labeling, and holding are different Part 111 workloads. A consultant who has only supported contract manufacturers may not be the right fit for a brand owner, and the reverse is also true.
- Can you start this week? If the inspection is close, a consultant who can't begin for a month isn't helping.
- Will you review our actual records and not just our procedures? Procedures describe what you intend to do. Records show what you did. Investigators spend their time on the second.
- Do you run a mock inspection? A mock inspection is a practice run where the consultant plays the investigator, asks for records, and walks your floor. It's the closest you can get to the real thing, and it shows you where your staff freeze up.
Also ask for a written scope, a firm start date, and the name and Part 111 inspection background of the person who will do the work. If you'd rather start on your own, that's a good instinct too, and the one-hour exercise below costs nothing.
A one-hour exercise to start today
Run the batch record check described above on three recent lots, and write down every gap you find without fixing or rewriting anything yet.
That one hour will show you how much work you have before the investigator arrives. If the answer is "very little," you can spend the remaining time on specifications and supplier files. If the answer is "a lot," you'll know to bring in help immediately, and you'll be able to tell a consultant exactly where to begin.
Last updated: 2026-11-20
Frequently Asked Questions
Who can help us get our GMP records ready for an FDA inspection?
A consultant who knows 21 CFR Part 111, FDA's manufacturing rules for dietary supplements. Ideally they have prepared supplement plants for inspections before, and a former FDA investigator often fits well. Ask whether they will review your actual records, can start this week, and run a mock inspection.
Which records does an FDA investigator usually ask for first at a supplement company?
Usually specifications, master manufacturing records, batch production records, complaint files, and supplier qualification. Each ties to Part 111: specifications to 111.70, master records to 111.205 and 111.210, batch records to 111.255 and 111.260, complaints to 111.553 through 111.570, and certificates of analysis to 111.75.
Can a supplier's certificate of analysis replace our own testing?
For some specifications, yes, but only if you have qualified the supplier and periodically confirm its results (21 CFR 111.75(a)(2)). It cannot replace the identity test on a dietary ingredient, which you must test yourself under 21 CFR 111.75(a)(1).
What should we do if we find missing or incomplete records before the inspection?
Fix the process going forward and write a dated explanation of what you found and what you changed. Do not backdate a record or recreate one so it looks contemporaneous, because investigators can often tell and it damages trust in everything else you provide.
Who can review product complaints in a small supplement company?
A qualified person must review each complaint under 21 CFR 111.560. Section 111.3 defines that as someone with the education, training, or experience needed for the job, so in a small company it can be an employee or the owner.
Jared Clark
Principal Consultant, Certify Consulting
Jared Clark is the founder of Certify Consulting, helping organizations achieve and maintain compliance with international standards and regulatory requirements.